Beryllium single-element material

Beryllium single-element material material properties: Density 1.85 g/cm3, Young's modulus 287 GPa, Yield strength 240 MPa (highly purity and processing...

Overview

metal · light metal — Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route

Grade designation: Beryllium single-element material · Standard codes: Element 4 Be

Be; single-element material entry for periodic-table-based material search

Single-element material record. Use linked references and material-specific datasheets for grade-level design values.

Key material properties

Density	1.85 g/cm3
Young's modulus	287 GPa
Yield strength	240 MPa (highly purity and processing dependent for single-element material)
Thermal conductivity	200 W/mK
Heat resistance / melting point	1287 C (melting point for solids unless noted by phase/use)

Typical uses

X-ray window
aerospace structure
neutron reflector
copper beryllium alloy

Frequently asked questions

What is the density of Beryllium single-element material?

The density of Beryllium single-element material is 1.85 g/cm3.

What is Beryllium single-element material used for?

Beryllium single-element material is typically used for X-ray window, aerospace structure, neutron reflector and copper beryllium alloy.

What condition does Beryllium single-element material refer to?

Beryllium single-element material refers to the "Single element" condition: Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route.

What category of material is Beryllium single-element material?

Beryllium single-element material is categorized as metal (family: light metal).