Lead single-element material
Lead single-element material material properties: Density 11.34 g/cm3, Young's modulus 16 GPa, Yield strength 12 MPa (highly purity and processing dependent...
Overview
metal · heavy metal — Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route
Grade designation: Lead single-element material · Standard codes: Element 82 Pb
Pb; single-element material entry for periodic-table-based material search
Single-element material record. Use linked references and material-specific datasheets for grade-level design values.
Key material properties
| Density | 11.34 g/cm3 |
|---|---|
| Young's modulus | 16 GPa |
| Yield strength | 12 MPa (highly purity and processing dependent for single-element material) |
| Thermal conductivity | 35.3 W/mK |
| Heat resistance / melting point | 327.5 C (melting point for solids unless noted by phase/use) |
Typical uses
- radiation shielding
- lead-acid battery
- solder/alloy
- vibration damping material
Frequently asked questions
What is the density of Lead single-element material?
The density of Lead single-element material is 11.34 g/cm3.
What is Lead single-element material used for?
Lead single-element material is typically used for radiation shielding, lead-acid battery, solder/alloy and vibration damping material.
What condition does Lead single-element material refer to?
Lead single-element material refers to the "Single element" condition: Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route.
What category of material is Lead single-element material?
Lead single-element material is categorized as metal (family: heavy metal).
Internal tools
Related materials
References
- Lead — PubChem compound entry (PubChem (NCBI))