Molybdenum single-element material

Molybdenum single-element material material properties: Density 10.28 g/cm3, Young's modulus 329 GPa, Yield strength 550 MPa (highly purity and processing...

Overview

metal · refractory metal — Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route

Grade designation: Molybdenum single-element material · Standard codes: Element 42 Mo

Mo; single-element material entry for periodic-table-based material search

Single-element material record. Use linked references and material-specific datasheets for grade-level design values.

Key material properties

Density	10.28 g/cm3
Young's modulus	329 GPa
Yield strength	550 MPa (highly purity and processing dependent for single-element material)
Thermal conductivity	138 W/mK
Heat resistance / melting point	2623 C (melting point for solids unless noted by phase/use)

Typical uses

high-temp furnace component
tool steel additive
TZM alloy
electrode

Frequently asked questions

What is the density of Molybdenum single-element material?

The density of Molybdenum single-element material is 10.28 g/cm3.

What is Molybdenum single-element material used for?

Molybdenum single-element material is typically used for high-temp furnace component, tool steel additive, TZM alloy and electrode.

What condition does Molybdenum single-element material refer to?

Molybdenum single-element material refers to the "Single element" condition: Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route.

What category of material is Molybdenum single-element material?

Molybdenum single-element material is categorized as metal (family: refractory metal).