Indium single-element material

Indium single-element material material properties: Density 7.31 g/cm3, Young's modulus 11 GPa, Thermal conductivity 81.8 W/mK Typical uses include ITO...

Overview

metal · soft low melting metal — Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route

Grade designation: Indium single-element material · Standard codes: Element 49 In

In; single-element material entry for periodic-table-based material search

Single-element material record. Use linked references and material-specific datasheets for grade-level design values.

Key material properties

Density	7.31 g/cm3
Young's modulus	11 GPa
Thermal conductivity	81.8 W/mK
Heat resistance / melting point	156.6 C (melting point for solids unless noted by phase/use)

Typical uses

ITO transparent electrode
low-melting solder
sealant
compound semiconductor

Frequently asked questions

What is the density of Indium single-element material?

The density of Indium single-element material is 7.31 g/cm3.

What is Indium single-element material used for?

Indium single-element material is typically used for ITO transparent electrode, low-melting solder, sealant and compound semiconductor.

What condition does Indium single-element material refer to?

Indium single-element material refers to the "Single element" condition: Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route.

What category of material is Indium single-element material?

Indium single-element material is categorized as metal (family: soft low melting metal).