Palladium single-element material

Palladium single-element material material properties: Density 12.02 g/cm3, Young's modulus 121 GPa, Yield strength 180 MPa (highly purity and processing...

Overview

metal · platinum-group metal — Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route

Grade designation: Palladium single-element material · Standard codes: Element 46 Pd

Pd; single-element material entry for periodic-table-based material search

Single-element material record. Use linked references and material-specific datasheets for grade-level design values.

Key material properties

Density	12.02 g/cm3
Young's modulus	121 GPa
Yield strength	180 MPa (highly purity and processing dependent for single-element material)
Thermal conductivity	71.8 W/mK
Heat resistance / melting point	1555 C (melting point for solids unless noted by phase/use)

Typical uses

hydrogen permeation membrane
Catalyst
electronic contact
dental alloy

Frequently asked questions

What is the density of Palladium single-element material?

The density of Palladium single-element material is 12.02 g/cm3.

What is Palladium single-element material used for?

Palladium single-element material is typically used for hydrogen permeation membrane, Catalyst, electronic contact and dental alloy.

What condition does Palladium single-element material refer to?

Palladium single-element material refers to the "Single element" condition: Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route.

What category of material is Palladium single-element material?

Palladium single-element material is categorized as metal (family: platinum-group metal).