Silver single-element material

Silver single-element material material properties: Density 10.49 g/cm3, Young's modulus 83 GPa, Yield strength 55 MPa (highly purity and processing...

Overview

metal · precious conductive metal — Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route

Grade designation: Silver single-element material · Standard codes: Element 47 Ag

Ag; single-element material entry for periodic-table-based material search

Single-element material record. Use linked references and material-specific datasheets for grade-level design values.

Key material properties

Density	10.49 g/cm3
Young's modulus	83 GPa
Yield strength	55 MPa (highly purity and processing dependent for single-element material)
Thermal conductivity	429 W/mK
Heat resistance / melting point	961.8 C (melting point for solids unless noted by phase/use)

Typical uses

high-conductivity contact
brazing filler
conductive paste
antibacterial material

Frequently asked questions

What is the density of Silver single-element material?

The density of Silver single-element material is 10.49 g/cm3.

What is Silver single-element material used for?

Silver single-element material is typically used for high-conductivity contact, brazing filler, conductive paste and antibacterial material.

What condition does Silver single-element material refer to?

Silver single-element material refers to the "Single element" condition: Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route.

What category of material is Silver single-element material?

Silver single-element material is categorized as metal (family: precious conductive metal).