Tantalum single-element material

Tantalum single-element material material properties: Density 16.69 g/cm3, Young's modulus 186 GPa, Yield strength 170 MPa (highly purity and processing...

Overview

metal · refractory corrosion-resistant metal — Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route

Grade designation: Tantalum single-element material · Standard codes: Element 73 Ta

Ta; single-element material entry for periodic-table-based material search

Single-element material record. Use linked references and material-specific datasheets for grade-level design values.

Key material properties

Density	16.69 g/cm3
Young's modulus	186 GPa
Yield strength	170 MPa (highly purity and processing dependent for single-element material)
Thermal conductivity	57.5 W/mK
Heat resistance / melting point	3017 C (melting point for solids unless noted by phase/use)

Typical uses

capacitor
corrosion-resistant chemical equipment
Medical implants
high-temp furnace component

Frequently asked questions

What is the density of Tantalum single-element material?

The density of Tantalum single-element material is 16.69 g/cm3.

What is Tantalum single-element material used for?

Tantalum single-element material is typically used for capacitor, corrosion-resistant chemical equipment, Medical implants and high-temp furnace component.

What condition does Tantalum single-element material refer to?

Tantalum single-element material refers to the "Single element" condition: Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route.

What category of material is Tantalum single-element material?

Tantalum single-element material is categorized as metal (family: refractory corrosion-resistant metal).