Tin single-element material

Tin single-element material material properties: Density 7.31 g/cm3, Young's modulus 50 GPa, Thermal conductivity 66.8 W/mK Typical uses include solder...

Overview

metal · post-transition metal — Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route

Grade designation: Tin single-element material · Standard codes: Element 50 Sn

Sn; single-element material entry for periodic-table-based material search

Single-element material record. Use linked references and material-specific datasheets for grade-level design values.

Key material properties

Density	7.31 g/cm3
Young's modulus	50 GPa
Thermal conductivity	66.8 W/mK
Heat resistance / melting point	231.9 C (melting point for solids unless noted by phase/use)

Typical uses

solder
plating
bronze
low-melting alloy

Frequently asked questions

What is the density of Tin single-element material?

The density of Tin single-element material is 7.31 g/cm3.

What is Tin single-element material used for?

Tin single-element material is typically used for solder, plating, bronze and low-melting alloy.

What condition does Tin single-element material refer to?

Tin single-element material refers to the "Single element" condition: Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route.

What category of material is Tin single-element material?

Tin single-element material is categorized as metal (family: post-transition metal).