Zinc single-element material

Zinc single-element material material properties: Density 7.14 g/cm3, Young's modulus 108 GPa, Thermal conductivity 116 W/mK Typical uses include...

Overview

metal · low melting metal — Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route

Grade designation: Zinc single-element material · Standard codes: Element 30 Zn

Zn; single-element material entry for periodic-table-based material search

Single-element material record. Use linked references and material-specific datasheets for grade-level design values.

Key material properties

Density	7.14 g/cm3
Young's modulus	108 GPa
Thermal conductivity	116 W/mK
Heat resistance / melting point	419.5 C (melting point for solids unless noted by phase/use)

Typical uses

galvanizing
die casting
brass
sacrificial anode

Frequently asked questions

What is the density of Zinc single-element material?

The density of Zinc single-element material is 7.14 g/cm3.

What is Zinc single-element material used for?

Zinc single-element material is typically used for galvanizing, die casting, brass and sacrificial anode.

What condition does Zinc single-element material refer to?

Zinc single-element material refers to the "Single element" condition: Single-element material record; engineering behavior depends strongly on isotope, purity, phase, form, and processing route.

What category of material is Zinc single-element material?

Zinc single-element material is categorized as metal (family: low melting metal).